|
|
|
|
|
|
|
|
|
|
|
| Alloy equivalents: |
CerroCAST, Ostalloy 281338, AIM 138/170 |
|
|
|
This alloy is one of the most interesting in the range of low melting point Bismuth based alloys. On solidification from the molten state and thereafter, it exhibits practically no dimensional change - unlike other Bismuth alloys, most of which expand whilst a few contract on ageing.
|
|
|
|
|
|
|
|
|
|
|
 |
|
|
Melting Range: 138-170ºC
Weight lb/in³: Approx 0.30
Brinell Hardness: 22
Max Sustained Load: 500 lbs/in²
Shrinkage After Casting: 0.0001" Per inch
|
|
|
| Cast Alloy 1.5 kilo ingots |
|
|
This material is available in the following forms
10 Kilo ingots. Approx.
1.5 Kilo ingots.Approx.
Other sizes on request
|
|
|
|
|
|
|
|
|
Reproduction of machined moulds for electro plating.
Mandrels for wave guides.
Production of master patterns for investment casting.
Moulds for plastic injection or blow moulding.
Spray masks.
Proof casting.
|
|
|
© This is the web site of Lowden Ltd on the Internet. All copyrights and other intellectual property rights in the design and contents of this web site are reserved to Lowden Ltd. You may use it only as Lowden Ltd expressly permits you to. Any copying of the design or contents, or other unauthorised use, such as downloading and printing out any web pages, will infringe the rights of Lowden Ltd under international treaty and English law. Lowden Ltd is not responsible for the content of external Internet sites.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
