Lowden Ltd
Established 1973

Fields Metal (60oC)

Environmentally safe fusible alloy, contains no Lead or Cadmium.
This remarkable alloy melts at just 60 oC but, unlike the most familiar low melting point alloys, does not contain lead or cadmium. It is a relatively hard and extremely tough alloy that has a wide variety of scientific and manufacturing applications. It is used for example to fill small tubes for bending without crushing, casting for models and jewellery, and for making precision moulds. Although relatively expensive because it has a high Indium content.
cast alloy ingot dimentions

Alloy Eqivelants

Indalloy 19, MCP61, Metspec 114



Melting Point: 60ºC
Mass Density gm/cm3: 7.88
Electrical Conductivity % of IACS: 3.30
Thermal coefficient expansion micro in/in ppm/oC (@20oC): 22
Tensile strength PSI: 4850


Bonding to glass.
Sealing metal to glass.
May be used as a non-toxic replacement for Mercury. 

Available Forms

This material is available in the following forms

Ingot: 1 Kg larger ingots on request




Copyright © 2018 Lowden Limited I All Rights Reserved
© This is the web site of Lowden Ltd on the Internet. All copyrights and other intellectual property rights in the design and contents of this web site are reserved to Lowden Ltd. You may use it only as Lowden Ltd expressly permits you to. Any copying of the design or contents, or other unauthorized use, such as downloading and printing out any web pages, will infringe the rights of Lowden Ltd under international treaty and English law. Lowden Ltd is not responsible for the content of external Internet sites.