Lowden Ltd
Established 1973
fghfghfghfgh


Lens Alloy 136 (58oC)

This is the same as Lens alloy 117, but has a eutectic melting point of 58ºC, and is Cadmium free but has a slightly higher Indium content making it a little more expensive.
lens alloy 136 ingot dimentions

Alloy Eqivelants

AIM 58, CerrLOW136, Indally 136, Ostalloy 136, Asarcolow 136, MCP58, Metspec136

 

Data

Melting Point: Eutectic 58ºC
Weight lb/in3: Approx 0.30
Brinell Hardness: Approx 14.0
Growth After Casting: (Shrinkage) Approx 0.0002" Per inch

Uses

Holding glass lenses during grinding operations.
Proof casting where low temperatures are necessary.
Fusible mandrels.
Fuses for safety devices.


Available Forms

This material is available in the following forms

Ingot: 1.5 Kg larger ingots on request




 

Copyright © 2018 Lowden Limited I All Rights Reserved
© This is the web site of Lowden Ltd on the Internet. All copyrights and other intellectual property rights in the design and contents of this web site are reserved to Lowden Ltd. You may use it only as Lowden Ltd expressly permits you to. Any copying of the design or contents, or other unauthorized use, such as downloading and printing out any web pages, will infringe the rights of Lowden Ltd under international treaty and English law. Lowden Ltd is not responsible for the content of external Internet sites.